|
The RHS Series is
designed for temperature control of typical
foundry resins or alternate liquid components.
This temperature controls goes from barrel
heaters up to recirculating P.I.D. controlled
resin heating systems. Following is a selection
of products that we offer for this purpose for
any level of control.
RHS Resin
Barrel Heaters
Barrel
heaters are often used as a low cost and simple
means of heating liquids is drums. These units
are thermostatically controlled and can control
temperature within 10 to 15 degrees of set
point. Consideration must be given to the fact
that this heating is localized so the utmost is
resin temperature control will not be attained.
RHS Immersion
Heaters
Immersion heaters offer the advantage of more
intimate contact between the heating element and
the liquid being heated. Greater convection
heating occurs providing more consistent resin
temperature in the barrel. Temperatures are
controlled within the barrel within 5 to 10
degrees of set point.
RHS-1 Option
This
option provides a tube style circulation
heaters. Each 6-KW unit has a dedicated
thermostat control mounted to the heater body.
No over-temperature provisions are included.
Accuracy is ±10°F. This system will require a
recirculating resin supply to ensure that
temperatures are consistent while not
overheating an isolated portion of the resin.
Units available in multiple voltages and power
ratings.
RHS-2
Option
This option provides a complete resin heating
system for two resins. Programmable temperature
controllers monitor the temperature of each
resin and, via a P.I.D. algorithm, control the
power supplied to each heating chamber. Each
controller provides LED displays of the process
temperature. Emergency over-temperature
protection is also included for each resin.
Accuracy is ±3°F. This system will require a
recirculating resin supply to ensure that
temperatures are consistent while not
overheating an isolated portion of the resin.
Available in 240 or 480 V 3 Phase power.
|