6000 cfm scrubber for Amine or SO2. Scrubber is vertical and designed for 99% removal efficiency with an inlet loading of 335 ppm. The scrubber requires a 12’ packed bed.

Features

1. Scrubber tower is fabricated from ¼” thick black polypropylene with top and bottom connecting flanges.

2. Scrubber reservoir is fabricated from ½’ thick black polypropylene with flanged inlet and welded to tower. Reservoir has sloped bottom with PVC drain valve.

3. Scrubber top transition is flanged and fabricated from ¼” thick black polypropylene.

4. Scrubber packing is designed for 99.9% removal efficiency made from polypropylene.

5. Clear PVC spray nozzle view port.

6. One (1) 4” thick polypropylene mesh pad mist eliminator is installed above spray nozzles for mist removal to 10 micron.

7. One (1) 2500 cfm @ 4”static pressure constant speed V-belt drive with 316SS airstream components and 7.5 HP TEFC motor.

8. One (1) 5 HP CPVC vertical pump to circulate 130 gpm with valve and strainer.

9. Removable flanged spray header with hollow cone spray nozzles.

10. Scrubber includes pH monitor with removable probe for calibration.

11. Automatic water refill and fresh solution make-up solenoid mounted in liquid reservoir for evaporative make-up and fresh make-up. This is a pneumatic fail safe closed ball valve with air solenoid.

12. One (1) air diaphragm pump for automatic reagent adds with air solenoid for pump control based on level.

13. One (1) Flowline flow switch for pump on during make-up of fresh scrubber liquid.

14. Electrical control panel mounted on scrubber support frame includes the following:

• Enclosure 24 x 24 x 12 Hoffman Ultra series Non Metallic Enclosure.

• Back Plate 21 x 21

• Control Transformer 350va with primary and secondary fuse protection

• Power supply 5a 24vdc

• DC power fuse

AB Micro-Logix 1100 PLC 10 inputs 6 outputs:

• Inputs:

  • I/0 High level switch

  • I/1 Spare

  • I/2 Spare

  • I/3 Spare

  • I/4 MS1 aux contact Fan Run

  • I/5 MS2 aux contact Pump Run

  • I/6 PH Temperature

  • I/7 PHI input from external PH control

  • I/8 FS5 Pump flow check (Flow Line Flow switch FT10-5305

  • I/9 Control On/Off

  • Analog I/1 Ultrasonic level control

• Outputs:

  • O/0 MS1 Fan motor starter

  • O/1 MS2 Pump motor starter

  • O/2 Reagent Add Solenoid

  • O/3 Water Add Solenoid

  • O/4 Air Safety Solenoid

  • O/5 System Alarm