|
Foundry Products --> Compaction
Tables --> V-Series High Frequency Rotary
Compaction Tables Foundry
Products:
V-Series High
Frequency Rotary Compaction Tables
 Construction
All Palmer compaction
tables are manufactured in our well known,
foundry-duty format for years of use and abuse.
Heavy wall steel tubing and plate steel are used in
all fabrications.
The lift bar assembly
is actuated by the pneumatic lift bags. In the
elevated position the lift bars extend above the
roller conveyor approximately 1/2".
All Palmer compaction
tables are built to fit your conveyor
specifications. All we need to know is the roller
diameter, height, and spacing between the rollers to
manufacture to fit existing systems.
All Palmer compaction
tables feature easy access for cleaning and
maintenance.
Reversing
Vibrators
Reversing vibrators
are used to obtain the optimum compact ability of
molds and cores. The reversing vibrators provide a
different level of output force for each direction
of rotation. The use of two of these vibrators
produces four different output force levels while
maintaining the high frequency vibration that is
critical for the correct compaction.
General
Specifications
| Model |
V-4000-4 |
V-6000-4 |
V-10000-4 |
V-15000 |
V-20000-4 |
| Maximum
Capacity |
4000
Pounds |
6000
Pounds |
10000
Pounds |
15000
Pounds |
20000
Pounds |
| Table
Size (Standard) |
36"
x 60" |
48"
x 60" |
48"
x 60" |
60"
x 60" |
72"
x 72" |
| Top
of Roller Height |
24"
Standard - Custom Heights Available |
24"
Standard - Custom Heights Available |
24"
Standard - Custom Heights Available |
24"
Standard - Custom Heights Available |
24"
Standard - Custom Heights Available |
| Vibrators |
2
@ 3500 Pounds of Force Each |
2
@ 3500 Pounds of Force Each |
2
@ 5000 Pounds of Force Each |
2
@ 7500 Pounds of Force Each |
2
@ 10000 Pounds of Force Each |
| Lift
Bars |
5/8"
x 8" Tall Steel |
2"
x 8" Steel Tubing |
2"
x 8" Steel Tubing |
2"
x 8" Steel Tubing |
2"
x 8" Steel Tubing |
| Air
Bags |
6
@ 850 Pounds of Force Each |
8
@ 850 Pounds of Force Each |
10
@ 1300 Pounds of Force Each |
14
@ 1300 Pounds of Force Each |
20
@ 1300 Pounds of Force Each |
| Number
of Output Forces |
4 |
4 |
4 |
4 |
4 |
| Controls |
Automatic
cycle timer for one-button operation to
raise box, vibrate for a set amount of time,
and lower back onto conveyor. Pedestal-mounted
control panel is included and will have a
4-position switch for force output
selection, cycle start button, and emergency
stop button.
|
Controls
All reversing motor
starter and timer relays will be housed in the main
electrical enclosure. The cycle start button and the
force selector switch will be located at the
operator control box.
Operation
The mold/core box is
rolled onto the table rollers and filled. Prior to
striking off, the operator selects the force level
to run and presses the "cycle start"
button. The air bags inflate lifting the core/mold
above the rollers, the vibrator(s) run the amount of
time set on the timer located inside the enclosure.
Once the vibrators stop, the air bags lower the
core/mold to roller conveyor surface for striking
off.
Options
- Flat Top With or
Without Airbag
- Manual Conveyor
- Powered Conveyor
|
